INDUSTRIAL

SPECIALTY, HYDRAULIC & INDUSTRIAL PRODUCTS
(Grey stroke)

Chain and Bar Oil 1 L, 5 L, 20 L, 205 L

* Available in 150, 220, 320

A patented formulation utilizing a blend of highly refined base oils and additives, this super tacky extreme pressure formulation contains tackiness agents that permit it to tenaciously adhere to surfaces protecting saw teeth and chains from abrasive wear as well as advanced anti-corrosive additives to protect from rust.

Providing exceptional protection to cutting surfaces USS Chain and Bar Oil can be applied manually or in automatic lubrication systems, is washout resistant and particularly recommended for use where performance and longevity is important. Providing optimum lubrication at both low start up temperatures and high operational temperatures USS Chain and Bar Oil has added extreme pressure additives that prevent wear and withstand high loads.

USS Chain and Bar Oil provides maximum adhesion and resists wipe off, protecting the cutting surface up to 20% longer than conventional chain oil. USS Chain and Bar will adhere to the working surfaces of cutter bars, chains and scissor snickers in high speed applications resulting in less oil used and less down time sharpening chains, drills and blades, saving time and money.

APPLICATIONS/BENEFITS

• Excellent adhesive properties.
• Superior cutting blade protection
• Washout resistant.
• Protects against rust and corrosion.

Hydraulic Oil VG 10 L, 20 L, 205 L

* Available in VG 46 & 68

Produced from highly refined lubricating base stocks, these hydraulic oils are designed for hydraulic systems which operate at moderate temperatures. Highly effective in the event of water contamination, Hydraulic Oil VG inhibits foam from forming in the oil and is suitable for use in a wide variety of hydraulic equipment from forklifts to tailgate loaders.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Resists oxidation and foaming.
• Cost effective
• General Purpose Fluid.

Hydraulic Oil H (anti-wear) 5 L, 10 L, 20 L, 205 L

* Available in H 10, 22, 32, 46, 68, 100, 150, 220

USS Hydraulic Oil H is formulated using highly refined base stocks and additives packages and available in many ISO Viscosity grades. These oils are designed for hydraulic systems with higher make up rates or those which operate at moderate temperatures.

The additives used in Hydraulic Oil H enhance the anti-wear properties and inhibit foam forming in the oil as well as protecting against rust and corrosion in the event of water contamination. Superior and Economical, USS Hydraulic Oil H offers class leading protection and versatility.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS
- Please note performance is ISO grade specific

• Resists Foaming.
• Hagglunds-Denison Filterability TP02100
• Protects against Rust and Corrosion.
• DIN 51524 Part I (HL) & Part II (HLP)
• Prevents Wear.
• AFNOR NF E 48-603 (HL)
• Cost Effective Protection.
• Sperry Vickers M-2950-S & I-286-S
• Resists Oxidation.
• US Steel 126 & 127

Hydraulic Oil HV (anti-wear) 5 L, 10 L, 20 L, 205 L

* Available in H 15, 22, 32, 46, 68, 100

Available in a wide variety of ISO Viscosity grades, USS Hydraulic Oil HV is a petroleum based oil formulated using highly refined base stocks and balanced additives packages recommended for use in hydraulic systems, transmissions and pumps operating in a wide variety of conditions and temperatures. The formulations high viscosity indexes and low pour points provide proper flow at cold temperatures and exceptional fluid film strength at high temperatures.

The highly refined additives package used in Hydraulic Oil HV includes a shear stable viscosity index improver as well as anti wear agents providing exceptional protection all year round. Superior rust and corrosion protection with long term oxidation stability provides superior protection for all types of hydraulic pumps and systems.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS
- Please note performance is ISO grade specific

• Outstanding Cold Temperature Flow Properties.
• Denison HF-0, HF-1, HF-2
• Superior Rust and Corrosion Protection.
• DIN 51524 Part II
• Excellent Anti Wear Performance.
• AFNOR NFE 48-690 (dry), 48-691 (wet)
• All Year Round Protection.
• Vickers M-259-S
• Superior Oxidation Stability.
• US Steel 126 & 127
• Cincinnati Milacron P-68, P-69 & P-70
• General Motor LH-04-1, LH-06-1, LH-15-1
• Sauer Danfoss
• Rexroth
• Bosch variable vane pumps

Hydraulic Oil HX (anti-wear) 5 L, 10 L, 20 L, 205 L

* Available in H 32, 46, 68, 100, 150, 220

A state of the art formulation that produces a line of universal anti wear, long life hydraulic oils providing the wear characteristics required in the most severe applications, including stressed hydraulic systems and high pressure vane pumps. USS Hydraulic Oil HX is formulated with ashless and zinc free additives that make it suitable for pumps containing steel on bronze as well as silver plate lubrication surfaces. Possessing excellent thermal and oxidative stability thanks to its fully synthetic content, they function for much longer operational periods without forming sludge, varnish or other degradation by products which adversely affect the operation and performance of today’s modern hydraulic system components and filtration systems.

Possessing excellent hydrolytic stability and providing protection to all hydraulic system components, even in the presence of moisture, Hydraulic Oil HX is also resistant to foaming and aeration that could result in erratic equipment operation and increased oxidation.

Note: Additives in inferior Hydraulic Oil breaks down in conditions of high temperature and moisture forming acids that can attack copper, alloys, brass and bronze.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS
- Please note performance is ISO grade specific

• Highly resistant to Oxidation.
• Denison HF-0, HF-1, HF-2
• Protects against Rust and Corrosion.
• Cincinnati Milacron P-68, P-69 & P-70
• Anti Wear Formulation.
• General Motor LH-04-1, LH-06-1, LH-15-1
• State of the Art Formula.
• US Steel 127 & 136
• Resists Foaming and Aeration.
• Jeffry No. 87
• Universal Long Life Hydraulic Oil.
• Ford M-61C13227 13
• Excels in severe conditions.
• Lee Norse 100-1
• All Year Round Protection.
• B.F Goodrich
• Vickers M-2590-S & I-286-S

Hydraulic Oil HC (UTTO) 10 L, 20 L, 205 L

* Available in 10W, 10W30, 30, 50 universal tractor transmission oil

Produced using highly refined lubricating base stocks; Hydraulic Oil HC is specifically designed for various hydraulic and hydrostatic systems as well as almost all tractors’ transmission systems. Passing the requirements for the Universal Tractor Transmission Oil (UTTO) specification which includes frictional requirements and gear wear requirements, Hydraulic Oil HC is a multi-functional and versatile oil also suitable for use where a CAT TO-2 oil is recommended.

Advanced chemistry and additives provide maximum protection against mechanical wear, corrosive wear and rusting in almost all hydraulic and hydrostatic transmission systems while also providing excellent friction control, reduced brake noise and reduced gear wear, prolonging the life of vital components.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Excellent Oxidation Stability.
• Cat - TO-2
• Increased Frictional Durability.
• Allison - C-4 & C-3
• Excellent Deposit Control.
• Denison (pump only) - HF-0/1/2
• API - GL-4
• John Deere – J20C, J20D, J14 (A,B,C JDT303), J20 (A,B, Hy-Gard), J21A & J27
• Ford New Holland – M2C134D, M2C (A thru C), M2C86 – (A&B), M2C77-A, M2C53-A, M2C48 –
  (B&C) & M2C41-B
• J.I Case/Case International – MS-1204, 1205,1206, 1207, 1209, 1210, JIC-143, 144, 145 & 185
• Deutz – 25743 (PF-821 XL), 257541 & 246634
• Fiat-Hesston – AF-87, I.H.C – B%/ B-6 Hytran
• Kubota – UDT Fluid
• Landini – Tractor Hydr Fluid
• Renk – Bus Automatic Trans Fluid
• Massey Ferguson – M1110, 1127, 1129A, 1135, Permatrn III, 1139, 1141, 1143 & 1145
• Oliver – Type 55, Type 5J & Q1802
• Steiger – Hydr Trans Fluid
• Sauer Sunstrand/Danfoss – Hydrostatic Trans Fluid
• Versatile – Gear & Hydr Trans Fluid
• Volvo (including latest wet brake requirements)
• White–Q-1705, 1722, 1766B (UTHF) 1802 & 1826
• ZF Transmissions – TEML03 & TEML06
• Sperry Vickers / Eaton – 1-280-S & M2950S

Hydraulic Oil UTF (Powertrans) 10 L, 20 L, 205 L

* Available in 10W, 30, 50 CAT –TO-4

Hydraulic Oil UTF is a transmission oil blended from Paraffinic base oils and selected additives offering high levels of protection against corrosion and mechanical wear. Specifically formulated for use in mobile plant hydraulic equipment and power shift requirements, Hydraulic Oil UTF provides excellent friction control, less brake noise, reduced gear wear, excellent elastomer compatibility and oxidation stability for Power Shift Transmissions, Final Drive and Hydraulic Systems.

Outstanding performance prolonging the life of vital mechanical components, Hydraulic Oil UTF can be used successfully in several types of transmissions requiring API MT-1, ZF TE-ML 01, 03, 04, 10, 14 and Eaton Fuller performance levels.

Demonstrating API CF performance, Hydraulic Oil UTF guards against misuse in diesel engines provided the drain interval is shortened. 10W is particularly suitable for transaxles in modern front wheel drive vehicles.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Excellent Oxidation Stability
• API – SF/CF/CD/CF-2
• Excellent Frictional Durability
• Komatsu Micro-Clutch
• Excellent Deposit Control
• Vickers 35VQ25 Pump Wear Test
• Excellent Sludge Control
• Cat – TO-4
• Allison Type C-4

Hydraulic Oil HT (Hydratrans) 10 L, 20 L, 205 L

* Available in 10W CAT TO-2

Hydraulic Oil HT transmission oil is blended using Paraffinic base oils and selective additives offering high levels of protection against corrosion and mechanical wear.

Formulated for use in mobile plant hydraulic equipment and power shift transmissions where an oil recommended meeting Cat TO-2 specifications is required, Hydraulic Oil HT provides excellent friction control, less brake noise, reduced gear wear, good elastomer compatibility and oxidation stability for Power Shift Transmissions, Final Drive and Hydraulic Systems. This combination of outstanding performance prolongs the life of brakes and transmissions.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Excellent Oxidation Stability
• API – SF/CF/CD/CF-2
• Excellent Frictional durability
• CAT – TO-2
• Excellent Sludge & Deposit Control
• Allison Type C-2

Compressor Oil 10 L, 20 L, 205L

* Available in all grades

USS Compressor Oil is a mineral based lubricant designed for use in air compressors and high temperature circulating systems where freedom from deposit formation is desired. Formulated from high quality base oils and utalising special additives including our special non-hydrolyzing anti wear additive, USS Compressor Oil separates readily from water and is resistant to oxidation minimising the formation of acidic oxidation that can lead to system corrosion and oil failure.

Reduced wear as a result of excellent rust protection and tough film strength, even in high temperatures, USS Compressor Oil provides a high level of resistance to deposit formation and outstanding oxidation stability extending valve cleaning intervals.

Reinforced with advanced detergent components preventing the formation of varnish and carbon, USS Compressor Oils Advanced Formulation inhibits the formation of sludge, prevents plugging of compressor vane slots and keeps compressor cylinders, check valves and discharge lines clean. Supreme all round performance provides low wear rates and a long service life, 4000 hours in screw type and reciprocating compressors and 2000 hours in Hydrovane type compressors.

USS Compressor Oil grades 32, 46, and 68 are recommended for all rotary screw compressors and oil grades 100 and 150 for reciprocating compressors operating under severe conditions. Hydrovane type compressors should use Compressor Oil 150. All grades of USS Compressor Oil can be used as a hydraulic oil where the application calls for Non-Zinc oil type where there are pumps with silver plated surfaces.

APPLICATIONS/BENEFITS

• Effective Detergent Action.
• Protects against Rust and Corrosion.
• Superior Anti Wear Properties.
• Resists Oxidation.
• Minimizes Deposit Formation.

Synthetic Compressor Oil 10 L, 20 L, 205 L

* Available in RS32S, RS46S, RS68S

USS Synthetic Compressor Oil is designed for use in air compressors and high temperature circulating systems where freedom from deposit formation and extra long drain intervals are desired. Formulated from taylor made synthetic base stocks and reinforced with carefully selected additives, USS Synthetic Compressor Oil separates readily from water and is resistant to oxidation at all operating temperatures from the arctic cold to the desert heat, minimizing the formation of acidic oxidation that can lead to system corrosion and oil failure. A superior extra high viscosity index provides stable viscosity characteristics and maintains a tough fluid film at high operating temperatures while maintaining low temperature fluidity.

Reinforced with advanced detergent components preventing the formation of varnish and carbon, USS Synthetic Compressor Oils Advanced Formulation inhibits the formation of sludge, prevents plugging of compressor vane slots and keeps compressor cylinders, check valves and discharge lines clean. Specifically designed for all rotary screw compressors operating under severe conditions, Synthetic Compressor Oil is also suitable for use as a Hydraulic Oil where the application calls for a Non-Zinc type lubricant to protect pumps with silver plated surfaces.

USS Synthetic Compressor oils are suitable for Atlas Copco, Ingersoll Rand, compare, Champion, Sullair, ABAC, Kaeser and all other screw type air compressors. USS Synthetic Compressor Oils ensure;

· Longer cleaning intervals due to high resistance to deposit formation and outstanding oxidation stability.
· Low wear as a result of excellent rust protection and high film strength.
· Long Service Life – up to 6000 hours and beyond in screw type and reciprocating compressors and 2000 hours in Hydrovane type compressors.

APPLICATIONS/BENEFITS

• Effective Detergent Action.
• Superior Anti Rust and Corrosion Properties.
• Superior Anti Wear Properties.
• Superior Anti Oxidation Action.
• Minimizes Deposit Formation.
• Widest usable temperature range available.

MAXIS3 Industrial Gear Oil 10 L, 20 L, 205 L

* Available in all grades

MAXIS3 Industrial gear oils comprise of a group of extreme pressure, high load carrying gear lubricants designed to operate over a very wide range of temperatures and conditions. MAXIS3 lubricants provide excellent high temperature oxidation stability and superior low temperature fluidity. With the ability to rapidly separate from water and prevent the formation of anti lubricating emulsions MAXIS3 gear lubricants incorporate special additives including extreme pressure additives, optimizing performance and protection from shock loading, rust, corrosion, wear and foam.
With applications in virtually all industrial settings, typical applications include gear sets, oil circulating systems in steel mills, foundries, glass and bottle manufacturing plants, injection molding machines, paper mills, electrical wheel motors used in surface mining and quarries, shearing arms in underground coal mining, cement kilns, petroleum and chemical processing plants.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Excellent Low & High Temperature Protection
• US Steel 224
• Superior Rust and Corrosion Protection
• DIN 51517 Part 3
• Outstanding Galling, Scuffing and Welding
• AGMA 9005-E02 of Gear Teeth protection.

MAXIS3 Synthetic Industrial Gear Oil 10 L, 20 L, 205 L

* Available in 68, 100, 150, 220, 320, 460

Taking our mineral MAXIS3 Industrial Gear Lubricant to the next level, MAXIS3 Synthetic Gear Lubricant is produced using highly refined Polyalphaolefin synthetic lubricating base oils and a specially selected additives package containing lead free Extreme Pressure Agents. MAXIS3 Synthetic Industrial Gear Lubricants are designed to combine high load carrying capacity with high anti-friction characteristics.

Suitable for use in all types of industrial enclosed gear assemblies, MAXIS3 Synthetic Gear Oils may also be used as bearing oil for highly loaded plain bearings. Specifically designed for supreme high and low temperature performance, outstanding oxidation resistance, high film strength and high corrosion protection, MAXIS3 Synthetic Industrial Gear Oil provides supreme performance and protection in the most arduous conditions and outstanding flow properties yielding lower power consumption and operating temperatures.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Supreme High & Low Temperature Operation.
• Excellent Anti-Oxidation Resistance increasing Lubricant Life and Reducing Maintenance.
• Superior Film Strength providing superior wear Protection and Shock Load Capability.
• Supreme Corrosion Protection and Excellent Water Demulsibility
• Outstanding Flow Properties Lowering Power Consumption and Operating Temperatures

Soluble Cutting Oil 10 L, 20 L, 205 L

USS Soluble Cutting Oil is a water soluble metal working fluid formulated to form a very stable milky emulsion of high lubricity when mixed with water at a wide range of dilutions. The stability of this emulsion is not affected by hard water ions and the non foaming formulation makes it ideal for high speed metal working operations.

Superior high heat absorption characteristics provide advanced cooling in a variety of metal working applications. Soluble Cutting Oil provides excellent protection against rust and has been fortified with biocides to prevent rancidity caused by bacteria, leading to unpleasant odors, split emulsions and reduced product performance.

Recommended and designed for machining applications such as drilling, milling, tapping and threading of high carbon alloy and stainless steels, USS Soluble Cutting Oil is suitable for use on a wide range of mild steels, alloy steels and aluminum.

Recommended Dilutions in Water
Material/Operation MILD STEEL ALLOY STEEL ALUMINUM
Milling, Turning, Drilling 4% 5% 5%
Sawing 4% 4% 5%
Tapping & Threading 7% 10% 7%

APPLICATIONS/BENEFITS

• Superior Anti Rust and Corrosion Properties.
• Non-Foaming Formulation.
• Superior wetting and cooling capabilities.
• Resists bacterial attack.

NEAT Cutting Oil 10 L, 20 L, 205 L

A non-soluble, extreme pressure mineral cutting oil with low odour characteristics for machinist comfort, USS NEAT Cutting Oil is a new generation metal working fluid containing an extreme pressure additive system, rust and anti foam additives for long tool life, good heat transfer properties and surface finish. USS NEAT Cutting Oil is a specialty formula with no active phosphorous or chlorine additives.

Designed for heavy duty machining such as deep hole drilling, tapping, broaching and threading of high carbon alloy and stainless steels, USS NEAT Cutting Oil may stain non ferrous metals.

APPLICATIONS/BENEFITS

• Designed for Heavy Duty Applications
• Suitable for use on a Wide Variety of Ferrous Materials including Stainless Steel.
  

Maxi-Grind Synthetic-EP 10 L, 20 L, 205 L

USS Maxi-Grind Synthetic-EP is a fully synthetic, high performance water mix metal working fluid suitable for use in both machining and grinding applications. Formulated using the latest technology, Maxi-Grind Synthetic-EP is extremely stable in hard water and possesses the ability to remain clean and clear in the presence of tramp oil.

A supreme nitrite free formulation with low foaming tendencies, USS Maxi-Grind Synthetic-EP possess exceptional flushing performance, is Bio-stable and provides high levels of corrosion protection at low concentrations, traits vital for good grinding.

Developed for a wide variety of materials including cast iron, mild and stainless steel as well as non-ferrous materials, Maxi-Grind Synthetic-EP is free of Nitrites, Phenols, Chlorine and PTBBA.
.
APPLICATIONS/BENEFITS

• Extremely Bio-Stable.
• Contains Preservatives to Protect from Fungus and Bacteria.
• Suitable for a Wide Variety of Metals, including Cast Iron, Mild/Stainless Steel and non-Ferrous Metals.
• Stable in Water Hardness between 50 and 350 ppm..
• 3-5% Dilution suggested for General Purpose Surface & Cylindrical Grinding.

USS BRICK/MOULD RELEASE OIL 10 L, 20 L, 205 L

* Available in 5 (light), 15 (medium)

USS Brick Oil is a fortified fluid with excellent surface conditioning properties to enable quick release of the mould, producing an excellent surface finish. Suitable for all types of moulds and formwork where concrete, plaster, clay brick, tile or paver products are being manufactured.

USS Brick Oil will adhere to the steel mould and prevent surface corrosion which might discolour the product finish or create defects in the product surface. USS Brick Oil (medium) may be extended with high flash kerosene to give the desired result in clay pipe extrusion machines.

APPLICATIONS/BENEFITS

• Excellent Surface Conditioning Properties.
• Suitable for all Types of Moulds.
• Prevents Surface Corossion.

USS CONCRETE MOULD OIL 10 L, 20 L, 205 L

* Available in 5 light, 15 medium

Similar to USS Brick Oil, USS Concrete Mould Oil is a fortified fluid with excellent surface conditioning properties to enable quick release of the mould, producing an excellent surface finish. Suitable for all types of moulds and formwork where concrete is used, USS Concrete Oil combines advanced additives and tack agents to adhere to the mould or formwork preventing surface corrosion and discolouration as well as defects in the product surface.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Excellent Surface Conditioning Properties.
• Suitable for all Types of Moulds.
• Prevents Surface Corossion.

USS VACUUM PUMP OIL 10 L, 20 L, 205 L

* Available in 68, 100

A premium product formulated from selected highly stable base stocks and selected superior additives; USS Vacuum Pump Oil separates readily from water, protects pump components from wear and corrosion, has a long service life and is minimal deposit forming tendencies.

USS Vacuum Pump Oil is suitable for use in all milking machine vacuum pumps and industrial vacuum pumps. Due to excellent rust protection and superior film strength USS Vacuum Pump Oil displays exceptionally low wear rates and provides longer valve cleaning intervals as a result of a high resistance to deposit formation and outstanding oxidation stability.

APPLICATIONS/BENEFITS

• Resistant to Deposit Formation
• Long Service Life
• Outstanding Oxidation Stability
• Excellent Rust Protection
• High Film Strength
• Separates Readily from Water

USS MAXIGLIDE Slideway Oil 10 L, 20 L, 205 L

* Available in 68, 100, 150, 220, 320

USS Maxiglide Slideway oil is an extreme pressure lubricant with excellent surface conditioning characteristics. Used to lubricate manufacturing machinery under high loads and pressures such as lathes, milling machines and other equipment with slides and carriage ways, USS Maxiglide may also be used in machine tool hydraulic systems.

USS Maxiglide will adhere to working surfaces under high loads and temperatures and resists wash out from water soluble cutting fluids making USS Maxiglide the number 1 contender in the Australian Market.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Resists Oxidation and Washout.
• Extreme Pressure Lubricant.
• Excellent Surface Conditioning Characteristics.

USS HP HEAT TRANSFER OIL 10 L, 20 L, 205 L

* Available in 32, 46, 68, 100

Produced using highly refined lubricating base stocks blended with anti-oxidation additives, USS HP Heat Transfer Oil is a thermally stable, minimum deposit forming, long life product specifically developed to protect pump components from wear and corrosion.

Suitable for use in all heat transfer systems and thermal heating systems such as industrial process manufacturing, USS HP Heat Transfer Oil provides longer changeover intervals, high resistance to deposits, thermal cracking and outstanding oxidation stability.

APPLICATIONS/BENEFITS

• Resists Oxidation and Deposit Formation.
• Increased Change Over Intervals.
• Long Life & Thermally Stable.
• Contains High Temperature Oxidation Inhibitors.

USS ROCK DRILL OIL 10 L, 20 L, 205 L

* Available in 100, 320

Rock Drill Oils are a blend of highly refined base oils and special additives producing a superior lubricant for air powered equipment. Its natural high viscosity index provides optimum lubrication in both low start up temperatures and high operational temperatures. Extreme pressure additives prevent wear and withstand high loads often encountered in Rock Drills, jackhammers and other pneumatic equipment.

USS Rockdrill Oils contain special tackiness agents that permit them to tenaciously adhere to cylinder walls and other lubricated surfaces as well as fortified with extreme pressure additives that protect rock drills against wear caused by high load shocks.

Suitable for use in all types of pneumatic equipment including Rock Drills, Jackhammers, Paving Breakers, Pile Drivers and Air Tools.

APPLICATIONS/BENEFITS PERFORMANCE STANDARDS

• Resists oxidation and foaming.
• Cost effective
• General Purpose Fluid.